Setting up VPN on Mac 10.5 Leopard

Mac LeopardHere you will find the setup guide for creating a VPN connection. Setting up a VPN on a Mac is fairly easy, you just need to follow the steps outlined below. You can connect using PPTP VPN and L2TP IPsec VPN. Sometimes depending on the network you are connecting from, one of the protocols may not connect so you can either have 2 configured connections readily available to tweak the connection settings to switch between PPTP VPN and L2TP IPSEC VPN.

This could be the case if you connect from countries such as Thailand, Kuwait, Belize, China, Oman, Syria, Tunisia, Bahrain, UAE, Qatar, Saudi Arabia or even are at some US hotel.

If after creating the VPN connection on your Mac you are unable to browse the internet, appears that you have no internet or appears that you are not routing via the vpn (ip not changing) check the FAQ page..

Mac 10.5 PPTP VPN Configuration

  • 1.Click on System Preferences in the apple menu and then click on "Network" that is located under "Internet & Network"
    View Image
  • 2. On the bottom left, if the lock icon looks “locked”, click on it and type in your Administrator Name and password.
  • 3.Click the '+' icon (highlighted in red) to make a new VPN connection
    View Image
  • 4.A new window appears. Click on the 'Interface' menu to see the list of choices. Select VPN.
    View Image
  • 5. Now change the "VPN type" and select "PPTP VPN" and for "service name" name it something like VpnAccounts.com PPTP. Click "Create"
    View Image
  • 6.Now you can start entering your VPN account information and when done you click on "Authentication settings".

    -- Configuration: Default
    -- Server address: In the welcome email
    -- Account name: Username found in welcome email.
    -- Encryption: Automatic
    View Image
  • 7. In the "Authentication Settings" dialog, enter you password found in the Welcome email and click "OK
    View Image
  • 8.Click Advanced and make sure "Send all traffic over VPN connection" is checked and now click OK..
    View Image
  • 9.Check the box to "Show VPN status in menu bar" for easy access later and now Click Apply to save the settings.
  • 10.Connect by selecting your VPN connection in the connection list and click the "Connect" button

Mac 10.5 L2TP IPSEC VPN Configuration

  • 1.Click on System Preferences in the apple menu and then click on "Network" that is located under "Internet & Network"
    View Image
  • 2. On the bottom left, if the lock icon looks “locked”, click on it and type in your Administrator Name and password.
  • 3.Click the '+' icon (highlighted in red) to make a new VPN connection
    View Image
  • 4.A new window appears. Click on the 'Interface' menu to see the list of choices. Select VPN.
    View Image
  • 5.Now change the "VPN type" and select "L2TP IPSec VPN" and for "service name" name it something like VpnAccounts.com L2TP. Click "Create"
    View Image
  • 6.Now you can start entering your VPN account information and when done, click on Authentication settings..

    -- Configuration: Default
    -- Server address: In the welcome email
    -- Account name: Username found in welcome email.
    -- Encryption: Automatic
    View Image
  • 7.In the "Authentication Settings" window fill in the settings and press OK

    - User Authentication: Enter you password found in the Welcome email
    - Machine Authentication: enter the shared secret found in email
    View Image
  • 8.Click Advanced and make sure "Send all traffic over VPN connection" is checked and now click OK. ..
    View Image
  • 9. Check the box to "Show VPN status in menu bar" for easy access later and now Click Apply to save the settings.
  • 10.Connect by selecting your VPN connection in the connection list and click the "Connect" button.